How to Fix Monitor Goes Black

How to Fix Monitor Goes Black? Quick Solution

Imagine you’re doing something important on your computer, and then out of the blue, your screen goes black. It’s super frustrating! You might feel like all your focus goes away for a second. So, you try to reconnect everything to your computer, and the issue is fixed.

But here’s the tricky part: after a while, it happens again. You lose your momentum and can’t keep up with the pace you had before.

Also, check out our separate post on Best Gaming Monitors Under 300

But why did the display suddenly go black?

Your monitor goes black sometimes because the cables that connect it to your computer are causing trouble. The problem could happen if your HDMI or VGA cable is broken, if your graphics drivers are broken, or if you have a third-party program installed. Some tech experts also say that overclocking is to blame.

So, keep reading until you find the answer and can get back to work quickly.

How to Fix Monitor Goes Black for a Second and Comes Back On?

One of the most frequent misconceptions about a display briefly turning dark is that there could be a monitor problem. People attempt to solve the issue by switching their functions and doing regular checks, but they are unsuccessful.

Go through our epic guide on Are 32” Monitor Too Big for Daily Use?

Although this may cause a display to turn dark, I’m not suggesting that it always happens when a monitor is broken. There are several causes for this issue. In the following article, I’ll explain why this issue arises and how to fix it. Read each step carefully and follow each instruction until your problem is solved.

Here’s how to fix a monitor goes black for a second and then turns back on:

Check the Connections between CPU and Monitor

People often experience monitor blackouts due to a broken connection between the display and the CPU. The issue is with either the port or the cable. Therefore, you must unplug all the cords from the CPU and display and switch off your computer. To clean the ports and socket connections, use a soft brush.

Purchase replacement components and connect them to determine whether the issue has been resolved if you notice that any of the ports or port connections are damaged. If not, then the game begins. Apply the following solution and then go on.

Adjust Your PC’s Power Settings

A simple solution to your black screen issue is to change your PC’s power settings if you use Windows 10.

The methods to change your computer’s power settings are as follows:

  • Power is entered by pressing the Windows key. The Power & sleep settings option.
  • “When plugged in, switch off after” is beneath the screen; choose Never.
  • Select Never in the sleep category as well.
  • Screen saver can be found by using the search key.
  • Choose On or off the screen saver.

In a hurry? Check out my new post on Can You Run Two Monitors on Two GPUs

If it still doesn’t work for you, try restarting your computer. However, if your computer runs an earlier version of Windows, such as 8.1, 8, or 7, you must use the following techniques to change the power settings.

  • Choose the search option, enter “power choices,” and then select the result that pops up.
  • If you discover that it is set to High performance, choose between Balanced and Power saver, and vice versa.
  • Select never on under Change plan settings. Disable the display
  • Select Never on. Turn off the computer
  • Try restarting your computer to see if it resolves the problem.
  • Start Your Computer in Safe Mode

I can’t guarantee that this approach will fix your problem. But using this method will assist you in identifying the source of your issue. The steps to start your computer in safe mode are as follows:

  • Access Settings by Pressing the Windows key.
  • Click Update & Security option
  • Under the Advanced startup, choose Recovery, and then click Restart now. You can see a blue window with startup options from which to choose.
  • All you have to do is wait after pressing the F4 key to choose safe mode.

Your computer will immediately restart so that you may check whether the issue with the Monitor Goes Black and then coming back is still there.

Follow our guide to Which is the Best Time to Buy a Monitor?

Update Graphics Card’s Driver

Installing the most recent driver for your graphics card may solve any problems caused by an out-of-date or defective GPU driver. If your GPU’s driver is out-of-date, try running a driver updater scan on your computer. You can use the driver updater tool to install the most recent GPU driver if it does.

Too old or incompatible drivers may cause some of the most frequent Windows problems and issues. Latency, system failures, or even a blue screen of death (BSoD) might result from an out-of-date system. You may use an automated program to discover, download, and install the correct driver version on your Windows PC in just a few clicks to prevent issues of this kind.

Overheated Components

The phrase “ventilation” has undoubtedly crossed your tongue several times during your life, mainly if you’ve ever seen a video on constructing a PC. There is a considerable risk that your computer may function inadequate or perhaps crash after a while if the ventilation system is poor. A RAM module, graphics card, or maybe both might get overheated if the internal components are not adequately ventilated.

Check out our separate post on Why Do Graphics Cards Have Memory?

The remaining computer components are subsequently pushed to begin heating. It sometimes has the potential to overheat the display, which results in a brief blackout. To give your computer a thorough rest, you should clean the display and its internal parts. Additionally, make sure the fan in the CPU of a desktop or laptop is operating correctly.

Restore the GPU Driver

You must restore the drivers to their previous condition if you recently upgraded them and are experiencing problems.

The steps to roll back a GPU driver are as follows:

  • Press the Windows key + X hotkey combination to access the Win + X menu.
  • On the Win + X menu, choose the Device Manager shortcut.
  • Double-click the Device Manager window’s Display Adapters category.
  • Next, choose Properties by right-clicking the listed graphics card for your PC.
  • In the screenshot, just under, select the Driver tab.
  • On that tab, click the Roll Back Driver button.
  • Reverting the GPU driver requires that you restart Windows 10.

Do check our latest post on the ViewSonic VX2452MH | Best Review

Restart Windows 10

In this situation, configuring using the original boots is a well-known technique. To clean boot Windows 10, use the following methods:

  • As directed in the second resolution, launch the Win + X menu.
  • From the menu, choose Run.
  • Enter the following Run command: msconfig
  • To access the MSConfig utility, click OK, as shown below.
  • On the General tab, choose the radio option for Selective startup.
  • Remove a checkmark from the Load startup items checkbox.
  • Tick the boxes next to Load system services and Use the original boot settings.
  • In MSConfig, choose the Services tab.
  • Choose the Hide all Microsoft services option next.
  • The checkboxes for third-party services will be deselected when you click the Disable all button.
  • To save the modified boot configuration settings, click Apply.
  • To dismiss the window, click OK.
  • To restart your laptop or desktop, choose the Restart option.

Check out our expert-recommended SAMSUNG T350 | Exclusive Review

If a clean boot resolves the display problem, your system may have been mismatched with third-party applications. Your system may be affected by conflicts between third-party antivirus software and AMD or NVIDIA GeForce graphics applications. When using MSConfig, choose Load startup items and Enable all settings to return to your default boot setup.

However, if you do, you must identify and disable any competing background apps that are the root of the problem. Any incompatible software that you find should be removed.

Remove Just Few Unsuitable Applications

A third-party program may sometimes cause more harm than you can bear. So, stop using a few third-party applications and see whether the status updates. If it does, you will know that they weren’t the issues. So, the following is how to remove features or apps:

  • By pressing Windows Key, choose Settings.
  • Navigate to Apps > Apps and Features.
  • Uninstall the software by performing right-clicking on it.
  • So, remove one app at a time and see if the issue goes away.
Disable some clashing apps

Do Not Overclock

By overclocking, you may get your device to work quicker than usual on activities like producing a movie or an architectural design. Although it is often a benefit, it may sometimes negatively impact your system.

Therefore, stop overclocking since it puts too much strain on the GPU and may suddenly cause your screen to go black.

Try Using the Actually Woke Key

I suggest utilizing the wake-up shortcut immediately if none of the above processes has been helpful to you. If everything is in working order, tapping the Windows key while simultaneously holding down Shift, Ctrl, and B should result in a beep from the speaker. To determine if the problem has been fixed, check your PC.

Follow our guide to fixing Base Clock vs Boost Clock for CPU and GPU

Install the Newest Version of Windows

Any system may have undiscovered faults or errors. To fix the issues and responsibilities in the design, try applying the most recent Windows update patch.

Here are the procedures to install the newest version of Windows:

  • Access Settings by Press the Windows key.
  • Select Windows Update by clicking Update & Security first.
  • If a command prompt opens, choose the option to check for updates.
  • Your computer will automatically update if you give it some time.
Install the Newest Version of Windows
Install the Newest Version of Windows

Final Thoughts

The issue of the Monitor Goes Black is a significant problem many people have, but you can fix it by following the simple procedures I outlined above. In most cases, the problem resides in the wires connected to the computer’s central processing unit (CPU). On the other hand, this is not always the case. Many factors might contribute to this issue, but there are also many potential solutions of this problem.

I have covered practically every single one that is competent enough to solve the mystery. However, if you are still experiencing issues, do not delay going to the computer repair shop closest to you.

FAQs for Monitor Goes Black Fixed

Why does my monitor go black?

We’ll look at some of the things that can make a screen black or blank: There are problems with how your monitor or screen is connected. Update problems with the display adapter driver. problems with updates or installations that have been made recently.

What do I do when my monitor suddenly goes black?

Windows 10 could also lose connection with the screen, which could lead to a black screen. By pressing Windows + Ctrl + Shift + B on the keyboard, you can restart the video driver and reconnect the monitor.

How do you fix a black screen on a monitor?

If you have a flat-panel LCD monitor, unplug the power cable, wait about 30 seconds, reconnect the cable, and then turn on the monitor. This turns the monitor’s electronics back on. If the monitor has a video cable that can be removed, get a second cable in case the first one is broken.

Why does my monitor go black after a few seconds?

Your monitor going black for a few seconds is most likely caused by a problem with the cables that connect it to your computer. Usually, this is the problem if your screen goes black for a few seconds and then turns back on.

Why is my computer screen black but still running?

There are times when the screen might stay black because the graphics driver is broken or the LCD lighting isn’t working right. Connect an external monitor and restart the machine to test the screen. When the screen is black but you can hear the computer running, this test can help.